1、1=1，1=2的使用，在SQL语句组合时用的较多
“where 1=1” 是表示选择全部，“where 1=2”全部不选
if @strWhere !=
begin
set @strSQL = select count(*) as Total from [ + @tblName + ] where + @strWhere
end
else
begin
set @strSQL = select count(*) as Total from [ + @tblName + ]
end
begin
set @strSQL = select count(*) as Total from [ + @tblName + ] where + @strWhere
end
else
begin
set @strSQL = select count(*) as Total from [ + @tblName + ]
end
可以直接写成
set @strSQL = select count(*) as Total from [ + @tblName + ] where 1=1 安定 + @strWhere
2、收缩数据库
--重建索引
DBCC REINDEX
DBCC INDEXDEFRAG
DBCC INDEXDEFRAG
--收缩数据和日志
DBCC SHRINKDB
DBCC SHRINKFILE
DBCC SHRINKFILE
3、压缩数据库
dbcc shrinkdatabase(dbname)
4、转移数据库给新用户以已存在用户权限
exec sp_change_users_login update_one , newname , oldname
go
go
5、检查备份集
RESTORE VERIFYONLY from disk= E:\3652s.bak
6、修复数据库
ALTER DATABASE [3652s] SET SINGLE_USER
GO
DBCC CHECKDB( 3652s ,repair_allow_data_loss) WITH TABLOCK
GO
ALTER DATABASE [3652s] SET MULTI_USER
GO
GO
DBCC CHECKDB( 3652s ,repair_allow_data_loss) WITH TABLOCK
GO
ALTER DATABASE [3652s] SET MULTI_USER
GO
7、日志清除
SET NOCOUNT ON
DECLARE @LogicalFileName sysname,
@MaxMinutes INT,
@NewSize INT
USE tablename -- 要操作的数据库名
SELECT @LogicalFileName = tablename_log , -- 日志文件名
@MaxMinutes = 10, -- Limit on time allowed to wrap log.
@NewSize = 1 -- 你想设定的日志文件的大小(M)
Setup / initialize
DECLARE @OriginalSize int
SELECT @OriginalSize = size
FROM sysfiles
WHERE name = @LogicalFileName
SELECT Original Size of + db_name() + LOG is +
CONVERT(VARCHAR(30),@OriginalSize) + 8K pages or +
CONVERT(VARCHAR(30),(@OriginalSize*8/1024)) + MB
FROM sysfiles
WHERE name = @LogicalFileName
CREATE TABLE DummyTrans
(DummyColumn char (8000) not null)
DECLARE @Counter INT,
@StartTime DATETIME,
@TruncLog VARCHAR(255)
SELECT @StartTime = GETDATE(),
@TruncLog = BACKUP LOG + db_name() + WITH TRUNCATE_ONLY
DBCC SHRINKFILE (@LogicalFileName, @NewSize)
EXEC (@TruncLog)
-- Wrap the log if necessary.
WHILE @MaxMinutes > DATEDIFF (mi, @StartTime, GETDATE()) -- time has not expired
AND @OriginalSize = (SELECT size FROM sysfiles WHERE name = @LogicalFileName)
AND (@OriginalSize * 8 /1024) > @NewSize
BEGIN -- Outer loop.
SELECT @Counter = 0
WHILE ((@Counter < @OriginalSize / 16) AND (@Counter < 50000))
BEGIN -- update
INSERT DummyTrans VALUES ( Fill Log ) DELETE DummyTrans
SELECT @Counter = @Counter + 1
END
EXEC (@TruncLog)
END
SELECT Final Size of + db_name() + LOG is +
CONVERT(VARCHAR(30),size) + 8K pages or +
CONVERT(VARCHAR(30),(size*8/1024)) + MB
FROM sysfiles
WHERE name = @LogicalFileName
DROP TABLE DummyTrans
SET NOCOUNT OFF
DECLARE @LogicalFileName sysname,
@MaxMinutes INT,
@NewSize INT
USE tablename -- 要操作的数据库名
SELECT @LogicalFileName = tablename_log , -- 日志文件名
@MaxMinutes = 10, -- Limit on time allowed to wrap log.
@NewSize = 1 -- 你想设定的日志文件的大小(M)
Setup / initialize
DECLARE @OriginalSize int
SELECT @OriginalSize = size
FROM sysfiles
WHERE name = @LogicalFileName
SELECT Original Size of + db_name() + LOG is +
CONVERT(VARCHAR(30),@OriginalSize) + 8K pages or +
CONVERT(VARCHAR(30),(@OriginalSize*8/1024)) + MB
FROM sysfiles
WHERE name = @LogicalFileName
CREATE TABLE DummyTrans
(DummyColumn char (8000) not null)
DECLARE @Counter INT,
@StartTime DATETIME,
@TruncLog VARCHAR(255)
SELECT @StartTime = GETDATE(),
@TruncLog = BACKUP LOG + db_name() + WITH TRUNCATE_ONLY
DBCC SHRINKFILE (@LogicalFileName, @NewSize)
EXEC (@TruncLog)
-- Wrap the log if necessary.
WHILE @MaxMinutes > DATEDIFF (mi, @StartTime, GETDATE()) -- time has not expired
AND @OriginalSize = (SELECT size FROM sysfiles WHERE name = @LogicalFileName)
AND (@OriginalSize * 8 /1024) > @NewSize
BEGIN -- Outer loop.
SELECT @Counter = 0
WHILE ((@Counter < @OriginalSize / 16) AND (@Counter < 50000))
BEGIN -- update
INSERT DummyTrans VALUES ( Fill Log ) DELETE DummyTrans
SELECT @Counter = @Counter + 1
END
EXEC (@TruncLog)
END
SELECT Final Size of + db_name() + LOG is +
CONVERT(VARCHAR(30),size) + 8K pages or +
CONVERT(VARCHAR(30),(size*8/1024)) + MB
FROM sysfiles
WHERE name = @LogicalFileName
DROP TABLE DummyTrans
SET NOCOUNT OFF
8、更改某个表
exec sp_changeobjectowner tablename , dbo
9、存储更改全部表
CREATE PROCEDURE dbo.User_ChangeObjectOwnerBatch
@OldOwner as NVARCHAR(128),
@NewOwner as NVARCHAR(128)
AS
DECLARE @Name as NVARCHAR(128)
DECLARE @Owner as NVARCHAR(128)
DECLARE @OwnerName as NVARCHAR(128)
DECLARE curObject CURSOR FOR
select Name = name,
Owner = user_name(uid)
from sysobjects
where user_name(uid)=@OldOwner
order by name
OPEN curObject
FETCH NEXT FROM curObject INTO @Name, @Owner
WHILE(@@FETCH_STATUS=0)
BEGIN
if @Owner=@OldOwner
begin
set @OwnerName = @OldOwner + . + rtrim(@Name)
exec sp_changeobjectowner @OwnerName, @NewOwner
end
-- select @name,@NewOwner,@OldOwner
FETCH NEXT FROM curObject INTO @Name, @Owner
END
close curObject
deallocate curObject
GO
@OldOwner as NVARCHAR(128),
@NewOwner as NVARCHAR(128)
AS
DECLARE @Name as NVARCHAR(128)
DECLARE @Owner as NVARCHAR(128)
DECLARE @OwnerName as NVARCHAR(128)
DECLARE curObject CURSOR FOR
select Name = name,
Owner = user_name(uid)
from sysobjects
where user_name(uid)=@OldOwner
order by name
OPEN curObject
FETCH NEXT FROM curObject INTO @Name, @Owner
WHILE(@@FETCH_STATUS=0)
BEGIN
if @Owner=@OldOwner
begin
set @OwnerName = @OldOwner + . + rtrim(@Name)
exec sp_changeobjectowner @OwnerName, @NewOwner
end
-- select @name,@NewOwner,@OldOwner
FETCH NEXT FROM curObject INTO @Name, @Owner
END
close curObject
deallocate curObject
GO
10、SQL SERVER中直接循环写入数据
declare @i int
set @i=1
while @i<30
begin
insert into test (userid) values(@i)
set @i=@i+1
end
set @i=1
while @i<30
begin
insert into test (userid) values(@i)
set @i=@i+1
end
如：在下表中，要求就表中所有没有及格的成绩，在每次增长0.1的基础上，使他们刚好及格:
Name score
Zhangshan 80
Lishi 59
Wangwu 50
Songquan 69
while((select min(score) from tb_table)<60)
begin
update tb_table set score =score*1.01
where score<60
if (select min(score) from tb_table)>60
break
else
continue
end
begin
update tb_table set score =score*1.01
where score<60
if (select min(score) from tb_table)>60
break
else
continue
end
上一篇：经典SQL语句大全之应用篇
下一篇：经典SQL语句大全之提升篇
相关新闻
- 小程序登录流程图理解 2020-08-18
- 在C#中获取web.config中的配置信息 2021-08-23
- 小程序open-data头像样式 2021-04-10
- 小程序rich-text 富文本解析图片过大和图片路径的问题 2020-11-25
- C#中去掉字符串的最后一个字符 2020-11-23
